On the Potential Correlation between Dynamic Strain Aging and Liquid Metal Embrittlement in T91/LBE System

In the study of the liquid metal embrittlement (LME) of the T91/lead-bismuth eutectic (LBE) system, it is observed that LME occurs in a temperature interval which is similar to the temperature range where dynamic strain aging (DSA) is observed. However, the potential correlation between DSA and LME has not yet been satisfactorily investigated. This investigation for the T91/LBE system is exactly the topic of this work. For the evaluation of DSA and LME, slow strain rate tensile tests are conducted in the temperature range between 200 °C and 450 °C with strain rates of (Formula presented.) s (Formula presented.) and (Formula presented.) s (Formula presented.) in reference and a molten oxygen-depleted LBE environment. The resulting tensile properties, as well as the fracture surfaces and lateral surfaces of the failed samples, suggest a correlation between DSA and LME in the T91/LBE system. The maximum mechanical degradation of T91 is observed in the case where the effects of both DSA and LME on material properties are found to be at maximum. However, the observation of DSA was not identified as a prerequisite for LME to take place. Therefore, these results may indicate that DSA partly contributes to the ductility minimum observed in the T91/LBE system. In addition, the results of this work show that changes in the fracture surface and lateral surface are more sensitive features to claim for the potential occurrence of LME than the changes in total elongation.