Post-irradiation creep properties of cold-worked 316 stainless steel as measured with small creep specimens.

W. Vandermeulen; M. Snykers; Ph Van Asbroeck

Post-irradiation creep properties of cold-worked 316 stainless steel as measured with small creep specimens.

W. Vandermeulen, M. Snykers, Ph Van Asbroeck

Research output › peer-review

Abstract

Small specimens (4 mm gage length, 1. 3 mm diameter) of AISI 20% cold-worked (CW) 316 stainless steel have been irradiated at 700 degree C up to 2 multiplied by 10**2**2 n/cm**2. Ageing at 650 degree C as well as irradiation caused a reduction in creep life and an increase in minimum creep rate as compared with as-received specimens. An investigation of a possible size effect indicated no difference between creep results obtained on these small specimens and on larger ones.

Original language	English
Title of host publication	ASTM Special Technical Publication
Editors	W.R. Corwin, G.E. Lucas
Publisher	ASTM International
Pages	252-257
Number of pages	6
ISBN (Print)	0803104405
State	Published - 1986

Publication series

Name	ASTM Special Technical Publication
ISSN (Print)	0066-0558

ASJC Scopus subject areas

General Engineering

Cite this

@inproceedings{c41cd93303d3483ebfdc6c910e6824f6,

title = "Post-irradiation creep properties of cold-worked 316 stainless steel as measured with small creep specimens.",

abstract = "Small specimens (4 mm gage length, 1. 3 mm diameter) of AISI 20% cold-worked (CW) 316 stainless steel have been irradiated at 700 degree C up to 2 multiplied by 10**2**2 n/cm**2. Ageing at 650 degree C as well as irradiation caused a reduction in creep life and an increase in minimum creep rate as compared with as-received specimens. An investigation of a possible size effect indicated no difference between creep results obtained on these small specimens and on larger ones.",

author = "W. Vandermeulen and M. Snykers and {Van Asbroeck}, Ph",

year = "1986",

language = "English",

isbn = "0803104405",

series = "ASTM Special Technical Publication",

publisher = "ASTM International",

pages = "252--257",

editor = "W.R. Corwin and G.E. Lucas",

booktitle = "ASTM Special Technical Publication",

}

TY - GEN

T1 - Post-irradiation creep properties of cold-worked 316 stainless steel as measured with small creep specimens.

AU - Vandermeulen, W.

AU - Snykers, M.

AU - Van Asbroeck, Ph

PY - 1986

Y1 - 1986

N2 - Small specimens (4 mm gage length, 1. 3 mm diameter) of AISI 20% cold-worked (CW) 316 stainless steel have been irradiated at 700 degree C up to 2 multiplied by 10**2**2 n/cm**2. Ageing at 650 degree C as well as irradiation caused a reduction in creep life and an increase in minimum creep rate as compared with as-received specimens. An investigation of a possible size effect indicated no difference between creep results obtained on these small specimens and on larger ones.

AB - Small specimens (4 mm gage length, 1. 3 mm diameter) of AISI 20% cold-worked (CW) 316 stainless steel have been irradiated at 700 degree C up to 2 multiplied by 10**2**2 n/cm**2. Ageing at 650 degree C as well as irradiation caused a reduction in creep life and an increase in minimum creep rate as compared with as-received specimens. An investigation of a possible size effect indicated no difference between creep results obtained on these small specimens and on larger ones.

UR - http://www.scopus.com/inward/record.url?scp=0022594065&partnerID=8YFLogxK

M3 - In-proceedings paper

AN - SCOPUS:0022594065

SN - 0803104405

T3 - ASTM Special Technical Publication

SP - 252

EP - 257

BT - ASTM Special Technical Publication

A2 - Corwin, W.R.

A2 - Lucas, G.E.

PB - ASTM International

ER -